Alumilite Clear Slow 2 lb Kit

$36.00
Alumilite Clear 2 Pound (.9 kg) Kit
shipping2
 Back to: Alumilite Casting Resin, Dyes, and Metallic Powders

Check Shipping Cost

Enter your destination to get a shipping estimate.

Shipping estimate for destination:

, ,
Quantity:

Loading..

Alumilite is sold by weight,  This kit includes 2 pounds (.9 kg) each of A and B, approximately 32 ounces of mixed resin

Alumilite Clear Slow is a premium clear casting resin preferred by professional blank makers around the world!  This is the slow version which has a longer open time and a longer demold time.  This version was made primarily for the folks who frequently cast more than 24 oz in one cast.  The slower cure time helps reduce cracks in the cured resin due to excessive heat build up in the larger pours.  For pen blanks, knife blanks, call blanks, and other similar size castings, Alumilite Clear is a better choice due to the quicker cure time and demold time.


This resin was specially formulated with the woodworker's needs in mind including:

  • Resilience (less brittle than other resin types frequently used) so that your finished pieces don't crack if accidentally dropped
  • High polishability to achieve that high gloss many demand
  • High machinability which make your finished blanks easy to turn on a lathe, cut, route, or shape on a belt sander
  • Low shrinkage which makes Alumilite Clear the preferred resin for Worthless Wood (wood and resin) castings
  • Optical clarity for those times you need a clear casting which also means your dyed castings will remain true to color
  • Very low odor so your entire shop does not stink like when using other types of resin!

Alumilite Clear Slow has a 12min open time and pressure casting is recommended to achieve bubble free results.

Product Alumilite Clear
Color Clear
Mix Ratio 1:1 by WEIGHT
Pot Life 7 minutes
Demold Time (100 gr. Mass) 45-60 minutes
Mixed Viscosity (cps.) 450
Specific Gravity 1.04
Shore Hardness (ASTM D-2240) 78-80D
Shrinkage (in./in.) .005
Tensile Strength (ASTM D-638) (psi) 4,200
Elongation (in./in.) 10-15%
Temperature Resistance 140 F